TailplateTailplate
Run a report

Airworthiness Directive 2018-06-04

recurring
Official AD 2018-06-04 · FR doc 2018-05019 · 2018-03-29 · airframe

Airworthiness Directives; Airbus Airplanes

What this AD requires

We are superseding Airworthiness Directive (AD) 2004-03-07, which applied to certain Airbus Model A320-111, -211, -212, and -231 series airplanes. AD 2004-03-07 required repetitive inspections for fatigue cracking around the fasteners attaching the pressure panel to the flexible bracket at a certain frame (FR), adjacent to the longitudinal beams on the left and right sides of the airplane; and repair as necessary. This new AD retains certain requirements of AD 2004-03-07, expands the applicability, and requires an inspection of the fastener holes on the pressure panel and modification or repair as applicable. This AD was prompted by fatigue tests which revealed cracking around the fasteners attaching the pressure panel to the flexible bracket, and by the discovery of additional cracks under the longitudinal beams at locations that are not included in the inspection area required by AD 2004-03-07. We are issuing this AD to address the unsafe condition on these products.

Repetitive inspection. Re-inspect. The next-due date/hours depend on this aircraft’s time in service — a records report computes it from the logbooks.

Which aircraft AD 2018-06-04 applies to

MakesAirbus
ModelsA318-111, A318-112, A318-121, A318-122, A319-111, A319-112, A319-113, A319-114, A319-115, A319-131, A319-132, A319-133, A320-211, A320-212, A320-214, A320-231, A320-232, A320-233, A321-111, A321-112, A321-131, A321-211, A321-212, A321-213, A321-231, A321-232, A318, A319, A320, A321

Excludes airplanes on which Airbus Modification 151574 was embodied in production.

Whether AD 2018-06-04 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.
Date — When the work was done.
Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.
Signature & certificate — The A&P/IA who returned it to service, with certificate number.
Is AD 2018-06-04 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.