Airworthiness Directive 2018-01572

one-time
AD 2018-01572 · 2018-01-29 · airframe

Airworthiness Directives; Sikorsky Aircraft Corporation Helicopters

What this AD requires

We are superseding Airworthiness Directive (AD) 2017-07-02 for Sikorsky Aircraft Corporation (Sikorsky) Model 269D and Model 269D Configuration A helicopters. AD 2017-07-02 required reducing the life limit of and inspecting certain drive shafts. This new AD retains the requirements of AD 2017-07-02 and requires repeating the inspections. The actions of this AD are intended to detect and prevent an unsafe condition on these products.

Which aircraft AD 2018-01572 applies to

Models269D Configuration A, 269D
Part-conditionalSKCP2738-7, SKCP2738-5.

Applies only to helicopters with a KAflex engine side drive shaft P/N SKCP2738-7 and KAflex pulley side drive shaft P/N SKCP2738-5 both installed.

Whether AD 2018-01572 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

Supersession

Supersedes AD 2017-07-02.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of complianceThe specific action taken (inspected, replaced, modified) and to what revision.
DateWhen the work was done.
Aircraft timeTotal time in service / tach at compliance — how recurring next-due is computed.
Signature & certificateThe A&P/IA who returned it to service, with certificate number.
Is AD 2018-01572 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.