TailplateTailplate
Run a report

Airworthiness Directive 2017-14-01

recurring
Official AD 2017-14-01 · FR doc 2017-13949 · 2017-07-06 · airframe

Airworthiness Directives; Airbus Airplanes

What this AD requires

We are superseding Airworthiness Directive (AD) 2013-10-03, which applied to all Airbus Model A330-200, -200 Freighter, and -300 series airplanes; and Model A340-200, -300, -500, and -600 series airplanes. AD 2013-10-03 required one-time inspections for deformation and damage of the bogie beams of the main landing gear (MLG); repetitive inspections for damage and corrosion of the sliding piston sub-assembly on certain airplanes; and related investigative and corrective actions if necessary. This new AD removes Model A340-500 and 600 series airplanes from the applicability; removes certain one-time inspections of the MLG bogie beams and the sliding piston sub-assembly; revises certain compliance times; and requires replacement of certain MLGs with MLGs having an improved bogie beam, which constitutes terminating action for the repetitive inspections on the modified MLG. This AD was prompted by reports of corroded and cracked bogie beams under the bogie stop pad. We are issuing this AD to address the unsafe condition on these products.

Repetitive inspection. Re-inspect every 16 months. The next-due date/hours depend on this aircraft’s time in service — a records report computes it from the logbooks.

Which aircraft AD 2017-14-01 applies to

MakesAirbus
ModelsA330-201, A330-202, A330-203, A330-223, A330-223F, A330-243, A330-243F, A330-301, A330-302, A330-303, A330-321, A330-322, A330-323, A330-341, A330-342, A330-343, A340-211, A340-212, A340-213, A340-311, A340-312, A340-313, A330, A340

Excludes airplanes that have embodied Airbus Modification 204421 or Airbus Modification 205289 in production.

Whether AD 2017-14-01 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.
Date — When the work was done.
Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.
Signature & certificate — The A&P/IA who returned it to service, with certificate number.
Is AD 2017-14-01 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.