Is AD 2017-13-07 a recurring Airworthiness Directive?

Yes — AD 2017-13-07 requires a repetitive inspection every 500 hours. Next-due depends on the aircraft's time in service.

Which aircraft does AD 2017-13-07 apply to?

AD 2017-13-07 applies to Airbus — models A319-111, A319-112, A319-113, A319-114, A319-115, A319-131, A319-132, A319-133. Serial/part conditions may narrow it to specific aircraft.

Airworthiness Directive 2017-13-07

recurring

Official AD 2017-13-07 · FR doc 2017-13763 · 2017-07-05 · airframe

Airworthiness Directives; Airbus Airplanes

What this AD requires

We are adopting a new airworthiness directive (AD) for all Airbus Model A319, A320, and A321 series airplanes. This AD was prompted by a report that a main landing gear (MLG) door could not be closed due to rupture of the actuator fitting. This AD requires repetitive inspections for cracking of the MLG door actuator fitting and its components, and corrective actions if necessary. This AD also requires eventual replacement of all affected MLG door actuator fittings with new monoblock fittings, which would terminate the repetitive inspections. We are issuing this AD to address the unsafe condition on these products.

Repetitive inspection. Re-inspect every 500 hours. The next-due date/hours depend on this aircraft’s time in service — a records report computes it from the logbooks.

Which aircraft AD 2017-13-07 applies to

MakesAirbus

ModelsA319-111, A319-112, A319-113, A319-114, A319-115, A319-131, A319-132, A319-133, A320-211, A320-212, A320-214, A320-231, A320-232, A320-233, A321-111, A321-112, A321-131, A321-211, A321-212, A321-213, A321-231, A321-232, A319, A320, A321

Applies to all manufacturer serial numbers of the listed models.

Whether AD 2017-13-07 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.

Date — When the work was done.

Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.

Signature & certificate — The A&P/IA who returned it to service, with certificate number.

Is AD 2017-13-07 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.