Is AD 2017-13-08 a recurring Airworthiness Directive?

No — AD 2017-13-08 is a one-time directive. Verify it was complied with in the aircraft's records.

Which aircraft does AD 2017-13-08 apply to?

AD 2017-13-08 applies to Airbus — models A318-111, A318-112, A318-121, A318-122, A319-111, A319-112, A319-113, A319-114. Serial/part conditions may narrow it to specific aircraft.

Airworthiness Directive 2017-13-08

one-time

Official AD 2017-13-08 · FR doc 2017-13407 · 2017-06-29 · airframe

Airworthiness Directives; Airbus Airplanes

What this AD requires

We are superseding Airworthiness Directive (AD) 2015-23-13, for all Airbus Model A318 and A319 series airplanes, Model A320-211, - 212, -214, -231, -232, and -233 airplanes, and Model A321-111, -112, - 131, -211, -212, -213, -231, and -232 airplanes. AD 2015-23-13 required modification of the pin programming of the flight warning computer (FWC) to activate the stop rudder input warning (SRIW) logic; and an inspection to determine the part numbers of the FWC and the flight augmentation computer (FAC), and replacement of the FWC and FAC if necessary. This new AD, for certain airplanes, also requires accomplishment of additional modification instructions to install the minimum FWC and FAC configuration compatible with SRIW activation. This AD was prompted by a determination that, in specific flight conditions, the allowable load limits on the vertical tail plane could be reached and possibly exceeded. We are issuing this AD to address the unsafe condition on these products.

Which aircraft AD 2017-13-08 applies to

MakesAirbus

ModelsA318-111, A318-112, A318-121, A318-122, A319-111, A319-112, A319-113, A319-114, A319-115, A319-131, A319-132, A319-133, A320-211, A320-212, A320-214, A320-231, A320-232, A320-233, A321-111, A321-112, A321-131, A321-211, A321-212, A321-213, A321-231, A321-232, A318, A319, A320, A321

Applies to all manufacturer serial numbers of the listed models.

Whether AD 2017-13-08 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.

Date — When the work was done.

Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.

Signature & certificate — The A&P/IA who returned it to service, with certificate number.

Is AD 2017-13-08 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.