TailplateTailplate
Run a report

Airworthiness Directive 2017-07-05

recurring
Official AD 2017-07-05 · FR doc 2017-06098 · 2017-03-31 · airframe

Airworthiness Directives; Airbus Airplanes

What this AD requires

We are adopting a new airworthiness directive (AD) for all Airbus Model A330-243, -243F, -341, -342, and -343 airplanes. This AD requires an inspection to determine if affected hydraulic pressure tube assemblies are installed, and replacement with serviceable hydraulic pressure tube assemblies if necessary. This AD also requires repetitive replacements of serviceable hydraulic pressure tube assemblies. This AD was prompted by a determination that cracks can develop on the ripple damper of the hydraulic pressure tube assembly and reports of failure of the ripple damper of the hydraulic pressure tube assembly. We are issuing this AD to address the unsafe condition on these products.

Repetitive inspection. Re-inspect every 5 months. The next-due date/hours depend on this aircraft’s time in service — a records report computes it from the logbooks.

Which aircraft AD 2017-07-05 applies to

MakesAirbus
ModelsA330-243, A330-243F, A330-341, A330-342, A330-343, A330

Whether AD 2017-07-05 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.
Date — When the work was done.
Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.
Signature & certificate — The A&P/IA who returned it to service, with certificate number.
Is AD 2017-07-05 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.