Is AD 2017-02-05 a recurring Airworthiness Directive?

Yes — AD 2017-02-05 requires a repetitive inspection. Next-due depends on the aircraft's time in service.

Which aircraft does AD 2017-02-05 apply to?

AD 2017-02-05 applies to The Boeing Company — models 737-100, 737-200, 737-200C, 737-300, 737-400, 737-500, 737. Serial/part conditions may narrow it to specific aircraft.

Airworthiness Directive 2017-02-05

recurring

Official AD 2017-02-05 · FR doc 2017-01533 · 2017-02-07 · airframe

Airworthiness Directives; The Boeing Company Airplanes

What this AD requires

We are adopting a new airworthiness directive (AD) for all The Boeing Company Model 737-100, -200, -200C, -300, -400, and -500 series airplanes. This AD was prompted by reports of skin cracking found at the corners of the aft entry and aft galley doorways. This AD requires repetitive inspections for cracking of the fuselage skin assembly and the bear strap at the corners of the aft entry and aft galley doorways, and repair if necessary, which terminates the repetitive inspections of the repaired areas. We are issuing this AD to address the unsafe condition on these products.

Repetitive inspection. Re-inspect. The next-due date/hours depend on this aircraft’s time in service — a records report computes it from the logbooks.

Which aircraft AD 2017-02-05 applies to

MakesThe Boeing Company

Models737-100, 737-200, 737-200C, 737-300, 737-400, 737-500, 737

As identified in Boeing Alert Service Bulletin 737-53A1350, dated May 6, 2016. Installation of STC ST01219SE does not affect applicability; a change-in-product AMOC is not necessary for airplanes with that STC installed.

Whether AD 2017-02-05 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.

Date — When the work was done.

Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.

Signature & certificate — The A&P/IA who returned it to service, with certificate number.

Is AD 2017-02-05 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.