TailplateTailplate
Run a report

Airworthiness Directive 2016-25-15

recurring
Official AD 2016-25-15 · FR doc 2016-29511 · 2016-12-19 · airframe

Airworthiness Directives; Airbus Airplanes

What this AD requires

We are superseding Airworthiness Directive (AD) 2011-17-05, for certain Airbus Model A300 B2-1C, A300 B2-203, A300 B2K-3C, A300-B4- 103, A300 B4-203, and A300 B4-2C airplanes. AD 2011-17-05 required repetitive inspections in sections 13 through 18 of the fuselage between rivets of the longitudinal lap joints between frames (FRs) 18 and 80 for cracking, and repair or modification if necessary. This new AD requires a revised repetitive inspection program of all longitudinal lap joints and repairs between FRs 18 and 80 to address widespread fatigue damage (WFD). This AD was prompted by an evaluation done by the design approval holder indicating that certain sections of the longitudinal lap joints are subject to WFD; therefore, a revised inspection program is necessary. We are issuing this AD to address the unsafe condition on these products.

Repetitive inspection. Re-inspect. The next-due date/hours depend on this aircraft’s time in service — a records report computes it from the logbooks.

Which aircraft AD 2016-25-15 applies to

MakesAirbus
ModelsA300 B2-1C, A300 B2-203, A300 B2K-3C, A300-B4-103, A300 B4-203, A300 B4-2C, A300

Applies to all manufacturer serial numbers except those on which Airbus Modification 2611 has been embodied in production.

Whether AD 2016-25-15 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.
Date — When the work was done.
Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.
Signature & certificate — The A&P/IA who returned it to service, with certificate number.
Is AD 2016-25-15 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.