TailplateTailplate
Run a report

Airworthiness Directive 2016-20-08

recurring
Official AD 2016-20-08 · FR doc 2016-23261 · 2016-10-18 · airframe

Airworthiness Directives; Airbus Airplanes

What this AD requires

We are superseding Airworthiness Directive (AD) 95-21-09 for all Airbus Model A300 series airplanes, and Airbus Model A300 B4-600, B4-600R, and F4-600R series airplanes, and Model A300 C4-605R Variant F airplanes (collectively called Model A300-600 series airplanes). AD 95- 21-09 required repetitive inspections for cracking of the No. 2 flap beams, and replacement of the flap beams, if necessary; and provided optional modifications for extending certain inspection thresholds, and an optional terminating modification for certain inspections. This new AD requires reduced compliance times for inspections and also reduces the number of airplanes affected. This AD was prompted by a determination that the compliance times must be reduced. We are issuing this AD to detect and correct cracking of the No. 2 flap beams, which could result in rupture of the flap beams and reduced structural integrity of the airplane.

Repetitive inspection. Re-inspect. The next-due date/hours depend on this aircraft’s time in service — a records report computes it from the logbooks.

Which aircraft AD 2016-20-08 applies to

MakesAirbus
ModelsA300 B2-1A, A300 B2-1C, A300 B2K-3C, A300 B2-203, A300 B4-2C, A300 B4-103, A300 B4-203, A300 B4-601, A300 B4-603, A300 B4-620, A300 B4-622, A300 B4-605R, A300 B4-622R, A300 F4-605R, A300 F4-622R, A300 C4-605R Variant F, A300

A300 F4-605R airplanes are excluded if both Airbus Modifications 11133 and 12699 have been embodied. A300 F4-622R airplanes are excluded if Modifications 11133, 12047, 12048, and 12050 have all been embodied, or if both Modifications 11133 and 12699 have been embodied.

Whether AD 2016-20-08 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.
Date — When the work was done.
Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.
Signature & certificate — The A&P/IA who returned it to service, with certificate number.
Is AD 2016-20-08 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.