Is AD 2016-15-07 a recurring Airworthiness Directive?

No — AD 2016-15-07 is a one-time directive. Verify it was complied with in the aircraft's records.

Airworthiness Directive 2016-15-07

Q: Which aircraft does AD 2016-15-07 apply to?

AD 2016-15-07 applies to Bombardier — models CL-600-2C10, CL-600-2D15, CL-600-2D24, CL-600-2E25, CL-600. Serial/part conditions may narrow it to specific aircraft.

one-time

Official AD 2016-15-07 · FR doc 2016-17863 · 2016-07-29 · airframe

Airworthiness Directives; Bombardier, Inc. Airplanes

What this AD requires

We are adopting a new airworthiness directive (AD) for certain Bombardier, Inc. Model CL-600-2C10 (Regional Jet Series 700, 701, & 702), Model CL-600-2D15 (Regional Jet Series 705), Model CL-600-2D24 (Regional Jet Series 900), and Model CL-600-2E25 (Regional Jet Series 1000) airplanes. This AD was prompted by reports of corrosion found on the slat and flap torque tubes in the slat and flap control system. This AD requires replacement of the slat and flap torque tubes in the slat and flap control system. We are issuing this AD to prevent rupture of a corroded slat or flap torque tube. This condition could result in an inoperative slat or flap system and consequent reduced controllability of the airplane.

Which aircraft AD 2016-15-07 applies to

MakesBombardier

ModelsCL-600-2C10, CL-600-2D15, CL-600-2D24, CL-600-2E25, CL-600

Serial-conditional — narrows to serials 10002–10342, 15001–15361, 15001–15361, 19001–19041.

CL-600-2C10 (Regional Jet Series 700/701/702) S/N 10002-10342; CL-600-2D15 (Regional Jet Series 705) S/N 15001-15361; CL-600-2D24 (Regional Jet Series 900) S/N 15001-15361; CL-600-2E25 (Regional Jet Series 1000) S/N 19001-19041.

Whether AD 2016-15-07 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.

Date — When the work was done.

Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.

Signature & certificate — The A&P/IA who returned it to service, with certificate number.

Is AD 2016-15-07 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.