Airworthiness Directive 2016-11-19
one-timeAirworthiness Directives; Airbus Airplanes
What this AD requires
We are adopting a new airworthiness directive (AD) for certain Airbus Model A330-200, -200 Freighter, and -300 series airplanes; and all Airbus Model A340-200, -300, -500, and -600 series airplanes. This AD was prompted by reports of chafing of the feeder cable at the pylon- wing junction due to vibration; one report revealed that the cable loom plastic support bracket of the G-route was broken due to vibration; and another report revealed wire chafing due to clamp damage. This AD requires modifying the cable loom support bracket of the G-route of the inboard pylons at the pylon-wing junction. We are issuing this AD to prevent chafing of the wiring in the pylon-wing area, which could result in an electrical short circuit near a flammable fluid vapor zone, and consequent fire or fuel tank explosion.
Which aircraft AD 2016-11-19 applies to
Excludes A330 airplanes on which Airbus Modification 203672 has been embodied in production
Whether AD 2016-11-19 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.