Is AD 2016-10-08 a recurring Airworthiness Directive?

No — AD 2016-10-08 is a one-time directive. Verify it was complied with in the aircraft's records.

Airworthiness Directive 2016-10-08

Q: Which aircraft does AD 2016-10-08 apply to?

AD 2016-10-08 applies to Airbus — models A330-201, A330-202, A330-203, A330-223, A330-243, A330-223F, A330-243F, A330-301. Serial/part conditions may narrow it to specific aircraft.

one-time

Official AD 2016-10-08 · FR doc 2016-11575 · 2016-05-20 · airframe

Airworthiness Directives; Airbus Airplanes

What this AD requires

We are adopting a new airworthiness directive (AD) for all Airbus Model A330-200 Freighter, A330-200, A330-300, A340-200, A340- 300, A340-500, and A340-600 series airplanes. This AD was prompted by the results of endurance qualification tests on the trimmable horizontal stabilizer actuator (THSA), which revealed a partial loss of the no-back brake (NBB) efficiency in specific load conditions. This AD requires inspecting certain THSAs to determine the number of total flight cycles the THSA has accumulated, and replacing the THSA if necessary. We are issuing this AD to detect and correct premature wear of the carbon friction disks on the NBB of the THSA. Such a condition could lead to reduced braking efficiency in certain load conditions and, in conjunction with the inability of the power gear train to keep the ball screw in its last commanded position, could result in uncommanded movements of the trimmable horizontal stabilizer (THS) and loss of control of the airplane.

Which aircraft AD 2016-10-08 applies to

MakesAirbus

ModelsA330-201, A330-202, A330-203, A330-223, A330-243, A330-223F, A330-243F, A330-301, A330-302, A330-303, A330-321, A330-322, A330-323, A330-341, A330-342, A330-343, A340-211, A340-212, A340-213, A340-311, A340-312, A340-313, A340-541, A340-642, A330, A340

Whether AD 2016-10-08 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.

Date — When the work was done.

Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.

Signature & certificate — The A&P/IA who returned it to service, with certificate number.

Is AD 2016-10-08 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.