Airworthiness Directive 2016-09-08
one-timeAirworthiness Directives; The Boeing Company Airplanes
What this AD requires
We are adopting a new airworthiness directive (AD) for certain The Boeing Company Model 747-8 series airplanes. This AD requires a detailed inspection for correct installation of the flex hose clamp of the occupant backup air supply and a general visual inspection for damage of the flex hose, and related investigative and corrective actions if necessary. This AD was prompted by a report indicating that flex hoses of the occupant backup air supply were found disconnected from the adjacent fiberglass duct on two airplanes. We are issuing this AD to detect and correct an incorrect clamp installation on the inboard end of the flex hose, which allows the flex hose to slowly become disconnected from the adjacent fiberglass duct, and damage to the hose. This condition, in conjunction with a cargo fire event, can potentially lead to decreased airflow to the main deck, possibly resulting in smoke and/ or toxic fumes penetrating into the main deck passenger compartment, which could result in injury to the passengers or cabin crew.
Which aircraft AD 2016-09-08 applies to
Applies to airplanes identified in Boeing Alert Service Bulletin 747-21A2571, dated December 4, 2015.
Whether AD 2016-09-08 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.