Is AD 2016-07-23 a recurring Airworthiness Directive?

Yes — AD 2016-07-23 requires a repetitive inspection every 12 months. Next-due depends on the aircraft's time in service.

Which aircraft does AD 2016-07-23 apply to?

AD 2016-07-23 applies to Airbus — models A318-111, A318-112, A318-121, A318-122, A319-111, A319-112, A319-113, A319-114. Serial/part conditions may narrow it to specific aircraft.

Airworthiness Directive 2016-07-23

recurring

Official AD 2016-07-23 · FR doc 2016-09119 · 2016-05-02 · airframe

Airworthiness Directives; Airbus Airplanes

What this AD requires

We are adopting a new airworthiness directive (AD) for all Airbus Model A318, A319, A320, and A321 series airplanes. This AD was prompted by reports of in-flight loss of fixed and hinged main landing gear (MLG) fairings, and reports of post-modification MLG fixed fairing assemblies that have wear and corrosion. This AD requires, for certain airplanes, repetitive replacements of the fixed fairing upper and lower attachment studs of both left-hand (LH) and the right-hand (RH) MLG; and repetitive inspections for corrosion, wear, fatigue cracking, and loose studs of each forward stud assembly of the fixed fairing door upper and lower forward attachment of both LH and RH MLG; and replacement if necessary. This AD also provides an optional terminating modification for the repetitive replacements of the fixed fairing upper and lower attachment studs. We are issuing this AD to prevent in-flight detachment of an MLG fixed fairing and consequent damage to the airplane.

Repetitive inspection. Re-inspect every 12 months. The next-due date/hours depend on this aircraft’s time in service — a records report computes it from the logbooks.

Which aircraft AD 2016-07-23 applies to

MakesAirbus

ModelsA318-111, A318-112, A318-121, A318-122, A319-111, A319-112, A319-113, A319-114, A319-115, A319-131, A319-132, A319-133, A320-211, A320-212, A320-214, A320-231, A320-232, A320-233, A321-111, A321-112, A321-131, A321-211, A321-212, A321-213, A321-231, A321-232, A318, A319, A320, A321

Whether AD 2016-07-23 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.

Date — When the work was done.

Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.

Signature & certificate — The A&P/IA who returned it to service, with certificate number.

Is AD 2016-07-23 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.