Airworthiness Directive 2016-06-05
one-timeAirworthiness Directives; The Boeing Company Airplanes
What this AD requires
We are adopting a new airworthiness directive (AD) for certain The Boeing Company Model 777 airplanes. This AD was prompted by reports of fire and smoke at the engine aft pylon area resulting from fuel leakage caused by a damaged O-ring in the fuel coupling attached to the wing front spar. This AD requires applying sealant to fill the gap between the lower wing panels adjacent to the strut aft vapor barrier. We are issuing this AD to prevent fire and smoke at the engine aft pylon area in the event of a fuel leak, which could cause personal injury during ground operations. A fire spreading back and up to the aft fairing pylon can result in an uncontrolled fire in the strut and ignite the fuel tank.
Which aircraft AD 2016-06-05 applies to
Applies to airplanes identified in Boeing Special Attention Service Bulletin 777-54-0035, dated October 30, 2014.
Whether AD 2016-06-05 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.