TailplateTailplate
Run a report

Airworthiness Directive 2016-05-05

recurring
Official AD 2016-05-05 · FR doc 2016-04545 · 2016-03-09 · airframe

Airworthiness Directives; Airbus Airplanes

What this AD requires

We are adopting a new airworthiness directive (AD) for all Airbus Model A300 series airplanes; Model A300 B4-600, B4-600R, and F4- 600R series airplanes, and A300 C4-605R Variant F airplanes (collectively called Model A300-600 series airplanes); and Model A310 series airplanes. This AD was prompted by reports of cracked aluminum support struts of the trimmable horizontal stabilizer (THS) caused by stress corrosion. This AD requires inspections to identify the part number of each support strut, repetitive inspections for cracking of the THS support strut ends, installation of reinforcing clamps on strut ends, and replacement of support struts, if necessary. We are issuing this AD to detect and correct cracked THS support struts, which could lead to the rupture of all four support struts making the remaining structure unable to carry limit loads, which could result in loss of the THS and reduced control of the airplane.

Repetitive inspection. Re-inspect every 24 months. The next-due date/hours depend on this aircraft’s time in service — a records report computes it from the logbooks.

Which aircraft AD 2016-05-05 applies to

MakesAirbus
ModelsA300 B2-1A, A300 B2-1C, A300 B2K-3C, A300 B2-203, A300 B4-2C, A300 B4-103, A300 B4-203, A300 B4-601, A300 B4-603, A300 B4-620, A300 B4-622, A300 B4-605R, A300 B4-622R, A300 F4-605R, A300 F4-622R, A300 C4-605R Variant F, A310-203, A310-204, A310-221, A310-222, A310-304, A310-322, A310-324, A310-325, A300, A310

Applies to all manufacturer serial numbers.

Whether AD 2016-05-05 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.
Date — When the work was done.
Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.
Signature & certificate — The A&P/IA who returned it to service, with certificate number.
Is AD 2016-05-05 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.