Airworthiness Directive 2016-03883
one-timeAirworthiness Directives; Airbus Defense and Space S.A. (Formerly Known as Construcciones Aeronauticas, S.A.) Airplanes
What this AD requires
We are adopting a new airworthiness directive (AD) for all Airbus Defense and Space S.A. Model CN-235, CN-235-100, CN-235-200, CN- 235-300, and C-295 airplanes. This AD requires a general visual inspection of the rudder control system to confirm correct alignment and installation of the adjustment device, and repair if necessary. This AD was prompted by a report of disconnection of the kinematic chain from the co-pilot rudder pedals to the rudder control bars located under the cockpit floor; subsequent investigation revealed that the failure was caused by disconnection of the pedal adjustment device from the adjustment actuator. We are issuing this AD to detect and correct incorrect alignment and incorrect installation of the adjustment device, which could lead to loss of the rudder control from the affected side and possibly result in reduced control of the airplane.
Which aircraft AD 2016-03883 applies to
Whether AD 2016-03883 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.