Airworthiness Directive 2016-04-15
one-timeAirworthiness Directives; MD Helicopters Inc., Helicopters
What this AD requires
We are adopting a new airworthiness directive (AD) for MD Helicopters, Inc. (MDHI), Model 369A, 369D, 369E, 369FF, 369HE, 369HM, 369HS, 500N, and 600N helicopters with a certain part-numbered main rotor blade attach pin (pin) installed. This AD requires ensuring the life limit of the pin as listed in the Airworthiness Limitations section of aircraft maintenance records and Instructions for Continued Airworthiness (ICA). If the hours time-in-service (TIS) of a pin is unknown, or if a pin has exceeded its life limit, this AD requires removing the affected pin from service. This AD was prompted by a report from an operator who purchased pins that did not have life limit documentation. These actions are intended to document the life limit to prevent a pin remaining in service beyond its fatigue life, which could result in failure of a pin, failure of a main rotor blade, and subsequent loss of control of the helicopter.
Which aircraft AD 2016-04-15 applies to
Applies only to helicopters with an Aerometals main rotor blade attach pin, P/N 369X1004-5, installed.
Whether AD 2016-04-15 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.