Is AD 2016-01-16 a recurring Airworthiness Directive?

Yes — AD 2016-01-16 requires a repetitive inspection. Next-due depends on the aircraft's time in service.

Which aircraft does AD 2016-01-16 apply to?

AD 2016-01-16 applies to Dassault Aviation — models MYSTERE-FALCON 900. Serial/part conditions may narrow it to specific aircraft.

Airworthiness Directive 2016-01-16

recurring

Official AD 2016-01-16 · FR doc 2016-00629 · 2016-01-21 · airframe

Airworthiness Directives; Dassault Aviation Airplanes

What this AD requires

We are superseding Airworthiness Directive (AD) 2002-23-20, for certain Dassault Aviation Model FALCON 900EX and MYSTERE-FALCON 900 airplanes. AD 2002-23-20 required repetitive operational tests of the flap asymmetry detection system to verify proper functioning, and repair if necessary; repetitive replacement of the inboard flap jackscrews with new or reconditioned jackscrews; and repetitive measurement of the screw/nut play of the jackscrews on the inboard and outboard flaps to detect discrepancies, and corrective action if necessary. AD 2002-23-20 also required a revision of the airplane flight manual. Since we issued AD 2002-23-20, the maintenance manual has been revised. This AD requires revising the maintenance or inspection program, as applicable, to include the maintenance tasks and airworthiness limitations specified in the Airworthiness Limitations section of the airplane maintenance manual. This AD also removes the Model FALCON 900EX airplanes from the applicability. We are issuing this AD to prevent reduced structural integrity of the airplane.

Repetitive inspection. Re-inspect. The next-due date/hours depend on this aircraft’s time in service — a records report computes it from the logbooks.

Which aircraft AD 2016-01-16 applies to

MakesDassault Aviation

ModelsMYSTERE-FALCON 900

Applies to all airplanes, certificated in any category.

Whether AD 2016-01-16 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.

Date — When the work was done.

Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.

Signature & certificate — The A&P/IA who returned it to service, with certificate number.

Is AD 2016-01-16 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.