Airworthiness Directive 2016-01-10
recurringAirworthiness Directives; Airbus Airplanes
What this AD requires
We are superseding Airworthiness Directive (AD) 2004-20-14, for all Airbus Model A300 B4-2C, B4-103, and B4-203 airplanes; and all Airbus Model A300 B4-600, B4-600R, and F4-600R series airplanes. AD 2004-20-14 required repetitive inspections to detect cracking of the splice fitting at fuselage frame (FR) 47 between stringers 24 and 26 (left- and right-hand sides), and corrective actions if necessary. This new AD reduces the inspection compliance time and repetitive inspection intervals, and adds Airbus Model A300 C4-605R Variant F airplanes to the applicability. This AD was prompted by a determination that the inspection compliance time and repetitive inspection interval must be reduced to allow timely detection of cracks in the splice fitting at fuselage FR 47. We are issuing this AD to detect and correct cracking of the splice fitting at fuselage FR 47; such cracking could result in reduced structural integrity of the airplane.
Which aircraft AD 2016-01-10 applies to
Whether AD 2016-01-10 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.