Is AD 2016-01-04 a recurring Airworthiness Directive?

Yes — AD 2016-01-04 requires a repetitive inspection. Next-due depends on the aircraft's time in service.

Which aircraft does AD 2016-01-04 apply to?

AD 2016-01-04 applies to Boeing — models 747-100, 747-100B, 747-100B SUD, 747-200B, 747-200C, 747-200F, 747-300, 747-400. Serial/part conditions may narrow it to specific aircraft.

Airworthiness Directive 2016-01-04

recurring

Official AD 2016-01-04 · FR doc 2016-00011 · 2016-01-13 · airframe

Airworthiness Directives; The Boeing Company Airplanes

What this AD requires

We are superseding Airworthiness Directive (AD) 2005-01-09, which applied to certain The Boeing Company Model 747-100, 747-100B, 747-100B SUD, 747-200B, 747-200C, 747-200F, 747-300, 747-400, 747-400D, 747-400F, and 747SR series airplanes. AD 2005-01-09 required a one-time detailed inspection for discrepancies of the frame web and inner chords on the forward edge frame of the number 5 main entry door cutout, and corrective action if necessary. This new AD adds repetitive high frequency eddy current (HFEC) inspections for cracking of the frame inner chords (forward and aft), and corrective action if necessary. This AD was prompted by additional cracking found in the same area after completion of the one-time detailed inspection. We are issuing this AD to detect and correct discrepancies of the frame web and inner chords, which could result in cracking, subsequent severing of the frame, and consequent rapid depressurization of the airplane.

Repetitive inspection. Re-inspect. The next-due date/hours depend on this aircraft’s time in service — a records report computes it from the logbooks.

Which aircraft AD 2016-01-04 applies to

MakesBoeing

Models747-100, 747-100B, 747-100B SUD, 747-200B, 747-200C, 747-200F, 747-300, 747-400, 747-400D, 747-400F, 747SR, 747

Applies to airplanes as identified in Boeing Alert Service Bulletin 747-53A2494, Revision 1, dated January 9, 2015.

Whether AD 2016-01-04 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.

Date — When the work was done.

Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.

Signature & certificate — The A&P/IA who returned it to service, with certificate number.

Is AD 2016-01-04 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.