TailplateTailplate
Run a report

Airworthiness Directive 2015-28313

recurring
AD 2015-28313 · 2015-11-10 · airframe

Airworthiness Directives; Sikorsky Aircraft Corporation (Type Certificate Previously Held by Schweizer Aircraft Corporation)

What this AD requires

We are adopting a new airworthiness directive (AD) for Sikorsky Aircraft Corporation (Sikorsky) Model 269A, 269A-1, 269B, 269C, 269C-1, 269D, and TH-55A helicopters. This AD requires repetitively inspecting and lubricating the tail rotor (T/R) driveshaft splined fittings. This AD was prompted by a report that the T/R driveshaft can disconnect due to deterioration of the splined coupling. The actions are intended to detect and prevent excessive wear of the splined coupling, which could lead to failure of the T/R driveshaft and subsequent loss of control of the helicopter.

Repetitive inspection. Re-inspect. The next-due date/hours depend on this aircraft’s time in service — a records report computes it from the logbooks.

Which aircraft AD 2015-28313 applies to

MakesSikorsky
Models269A, 269A-1, 269B, 269C, 269C-1, 269D, TH-55A, 269, TH-55

Whether AD 2015-28313 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.
Date — When the work was done.
Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.
Signature & certificate — The A&P/IA who returned it to service, with certificate number.
Is AD 2015-28313 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.