Airworthiness Directive 2015-22-07
one-timeAirworthiness Directives; Lockheed Martin Corporation/Lockheed Martin Aeronautics Company Airplanes
What this AD requires
We are adopting a new airworthiness directive (AD) for certain Lockheed Martin Corporation/Lockheed Martin Aeronautics Company Model 188 series airplanes. This AD was prompted by an evaluation by the design approval holder (DAH) indicating that the circumferential fuselage splice at fuselage-station (FS) 695 is subject to widespread fatigue damage (WFD). This AD requires an inspection for corrosion and previous repairs, severed stringers, cracking, and loose or distressed fasteners of the forward and aft ends of the stringer splices of certain stringers, inspection for cracking and modification of certain fastener holes common to the stringer and splice member at the forward and aft ends of the splice, and related investigative and corrective actions if necessary. We are issuing this AD to prevent loss of residual strength of the circumferential fuselage splice at FS 695, which could lead to rapid decompression of the cabin and potential loss of the airplane.
Which aircraft AD 2015-22-07 applies to
Whether AD 2015-22-07 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.