Airworthiness Directive 2015-19-16
one-timeAirworthiness Directives; The Boeing Company Airplanes
What this AD requires
We are adopting a new airworthiness directive (AD) for The Boeing Company Model 777 airplanes equipped with Rolls-Royce Trent 800 series engines. This AD was prompted by reports of in-flight separation of the engine's aft plug from the forward plug, which are the two parts of the turbine exhaust plug assembly. This AD requires installation of a serviceable turbine exhaust plug assembly (for certain airplanes), and a general visual inspection (for certain airplanes) to determine the diameter of the bolt used at the forward and aft plug interface, and applicable corrective actions. We are issuing this AD to prevent separation of the aft plug from the forward plug of the turbine exhaust plug assembly, which could result in parts departing the airplane and hitting the empennage, and destabilizing the airplane during a critical flight phase. In addition, parts remaining on a runway could pose a hazard to another airplane.
Which aircraft AD 2015-19-16 applies to
Applies only to airplanes equipped with Rolls-Royce Trent 800 series engines.
Whether AD 2015-19-16 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.