Airworthiness Directive 2015-17-15
one-timeAirworthiness Directives; Bombardier, Inc. Airplanes
What this AD requires
We are adopting a new airworthiness directive (AD) for certain Bombardier, Inc. Model CL-600-2C10 (Regional Jet Series 700, 701, & 702) airplanes, Model CL-600-2D15 (Regional Jet Series 705) airplanes, Model CL-600-2D24 (Regional Jet Series 900) airplanes, and Model CL- 600-2E25 (Regional Jet Series 1000) airplanes. This AD was prompted by results of a design review indicating that the burst pressure of the flexible hose, used to vent oxygen from the high-pressure relief valve of the oxygen cylinder overboard, was lower than the opening pressure of the high-pressure relief valve, which could cause the flexible hose to burst before it can vent the excess oxygen overboard. This AD requires replacing the oxygen hose assembly with a new, improved assembly. We are issuing this AD to prevent the accumulation of oxygen in an enclosed space, which could result in an uncontrolled oxygen-fed fire if an ignition source is nearby.
Which aircraft AD 2015-17-15 applies to
Serial ranges are model-specific: CL-600-2C10 SN 10002-10336; CL-600-2D15 and CL-600-2D24 SN 15001-15297; CL-600-2E25 SN 19001-19038.
Whether AD 2015-17-15 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.