TailplateTailplate
Run a report

Airworthiness Directive 2015-17-13

recurring
Official AD 2015-17-13 · FR doc 2015-20696 · 2015-09-02 · airframe

Airworthiness Directives; The Boeing Company Airplanes

What this AD requires

We are adopting a new airworthiness directive (AD) for certain The Boeing Company Model 777-200 and -300 series airplanes equipped with Pratt and Whitney engines. This AD was prompted by reports of blocked drain lines at the engine forward strut that caused flammable fluid to accumulate in a flammable leakage zone. This AD requires repetitive functional checks for blockage of the forward strut drain line and doing corrective actions if necessary, and a one-time cleaning of certain forward strut drain lines. This AD also provides an optional replacement of the drain lines and installation of insulation blankets, and a revision of the maintenance or inspection program, as applicable, to incorporate a certain airworthiness limitation, which would terminate the repetitive checks of the forward strut drain line. We are issuing this AD to detect and correct blockage of forward strut drain lines, which could cause flammable fluids to collect in the forward strut area and potentially cause an uncontrolled fire or cause failure of engine attachment structure and consequent airplane loss.

Repetitive inspection. Re-inspect. The next-due date/hours depend on this aircraft’s time in service — a records report computes it from the logbooks.

Which aircraft AD 2015-17-13 applies to

MakesBoeing
Models777-200, 777-300, 777

Applies only to airplanes equipped with Pratt & Whitney engines, as identified in Boeing Special Attention Service Bulletin 777-54-0027, Revision 1, dated September 12, 2013.

Whether AD 2015-17-13 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.
Date — When the work was done.
Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.
Signature & certificate — The A&P/IA who returned it to service, with certificate number.
Is AD 2015-17-13 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.