Airworthiness Directive 2015-17-04
one-timeAirworthiness Directives; Bombardier, Inc. Airplanes
What this AD requires
We are adopting a new airworthiness directive (AD) for certain Bombardier, Inc. Model CL-600-2C10 (Regional Jet Series 700, 701, & 702), CL-600-2D15 (Regional Jet Series 705), and CL-600-2D24 (Regional Jet Series 900) airplanes. This AD was prompted by reports of a disconnect between the elevator lever and control rod. This AD requires replacement of left and right fixed control rods and lever assemblies of the elevator control system. We are issuing this AD to prevent a disconnect between the elevator lever and control rod, which could lead to un-commanded elevator movement of the associated control surface, a large difference between the position of the left and the right elevator control surfaces, and consequent reduced controllability of the airplane and degradation of the structural integrity of the horizontal stabilizer.
Which aircraft AD 2015-17-04 applies to
CL-600-2C10 = Regional Jet Series 700/701/702; CL-600-2D15 = Regional Jet Series 705; CL-600-2D24 = Regional Jet Series 900.
Whether AD 2015-17-04 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.