Airworthiness Directive 2015-15-11
recurringAirworthiness Directives; The Boeing Company Airplanes
What this AD requires
We are adopting a new airworthiness directive (AD) for certain The Boeing Company Model 747-100B, 747-100B SUD, 747-200B, 747-200C, 747-200F, 747-300, 747-400, 747-400D, 747-400F, 747SR, and 747SP series airplanes. This AD was prompted by reports of skin cracks and subsequent findings of hidden corrosion found on the mating surfaces between certain skin and stringers at circumferential skin splices. This AD requires general visual inspections of the fuselage skin at certain lower circumferential splices for the presence of existing external doublers, repetitive inspections of the fuselage skin, and related investigative and corrective actions if necessary. We are issuing this AD to detect and correct hidden corrosion due to compromised fillet seals, which can result in skin cracking and consequent loss of capability to support limit loads.
Which aircraft AD 2015-15-11 applies to
Applies to airplanes identified in Boeing Alert Service Bulletin 747-53A2861, dated April 1, 2014.
Whether AD 2015-15-11 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.