TailplateTailplate
Run a report

Airworthiness Directive 2015-15-01

recurring
Official AD 2015-15-01 · FR doc 2015-17978 · 2015-07-24 · airframe

Airworthiness Directives; The Boeing Company Airplanes

What this AD requires

We are superseding Airworthiness Directive (AD) 2004-13-02, which applied to certain The Boeing Company Model 747-100, -200B, and - 200F series airplanes. AD 2004-13-02 required repetitive inspections to find discrepancies in the upper and lower skins of the fuselage lap joints, and repair if necessary. This new AD adds post-repair inspections for cracking and corrosion, and repair if necessary; structural modification at the lap joints; and post-modification inspections for cracking and corrosion, and repair if necessary. This AD was prompted by an evaluation by the design approval holder (DAH) that indicates the longitudinal lap joints are subject to widespread fatigue damage (WFD). The actions mandated by this AD are necessary to reach the limit of validity (LOV). We are issuing this AD to detect and correct fatigue cracking in the upper and lower skins of the fuselage lap joints, which could result in sudden fracture and failure of a lap joint and rapid in-flight decompression of the airplane fuselage.

Repetitive inspection. Re-inspect. The next-due date/hours depend on this aircraft’s time in service — a records report computes it from the logbooks.

Which aircraft AD 2015-15-01 applies to

MakesThe Boeing Company
Models747-100, 747-200B, 747-200F, 747

Applicability limited to airplanes identified in Boeing Alert Service Bulletin 747-53A2463, Revision 2, dated June 16, 2014.

Whether AD 2015-15-01 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.
Date — When the work was done.
Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.
Signature & certificate — The A&P/IA who returned it to service, with certificate number.
Is AD 2015-15-01 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.