Airworthiness Directive 2015-12-03
recurringAirworthiness Directives; The Boeing Company Airplanes
What this AD requires
We are superseding Airworthiness Directive (AD) 2007-13-05 for all The Boeing Company Model 777-200, -200LR, -300, and -300ER series airplanes. AD 2007-13-05 required repetitive measurements of the freeplay of the right and left elevators, rudder, and rudder tab, and related investigative and corrective actions if necessary. This new AD requires repetitive freeplay inspections and lubrication of the right and left elevators, rudder, and rudder tab, and related investigative and corrective actions if necessary. This AD was prompted by the manufacturer's determination that the procedure for the rudder freeplay inspection does not properly detect excessive freeplay in the rudder control load loop. We are issuing this AD to detect and correct excessive wear in the load loop components of the control surfaces, which could lead to excessive freeplay of the control surfaces, flutter, and consequent loss of control of the airplane.
Which aircraft AD 2015-12-03 applies to
Applies to airplanes with a Variable Number identified in Boeing Special Attention Service Bulletin 777-27-0062, Revision 2, dated January 27, 2014, OR airplanes with original airworthiness/export certificate of airworthiness issued on or after January 27, 2014.
Whether AD 2015-12-03 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.