Airworthiness Directive 2015-10-07
one-timeAirworthiness Directives; Turbomeca S.A. Turboshaft Engines
What this AD requires
We are superseding airworthiness directive (AD) 2014-01-01 for all Turbomeca S.A. Arrius 2F turboshaft engines. AD 2014-01-01 required a one-time inspection of the ejector assembly nozzle of certain serial number (S/N) lubricating devices and, if a discrepancy was found, removal and replacement of the affected ejector assembly nozzle with a part eligible for installation. This AD requires the same action as AD 2014-01-01 and expands the list of affected S/N lubricating devices. This AD was prompted by the determination that additional lubricating devices, identifiable by S/N, may have an incorrect bonding of the nozzle on the ejector assembly. We are issuing this AD to prevent failure of the ejector assembly nozzle, which could lead to an in- flight shutdown (IFSD) of the engine, damage to the engine, and damage to the helicopter.
Which aircraft AD 2015-10-07 applies to
Whether AD 2015-10-07 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.