TailplateTailplate
Run a report

Airworthiness Directive 2015-10-03

recurring
Official AD 2015-10-03 · FR doc 2015-11393 · 2015-05-29 · airframe

Airworthiness Directives; Airbus Airplanes

What this AD requires

We are superseding Airworthiness Directive (AD) 2014-09-05, for certain Airbus Model A330-200 and -300 series airplanes, and Model A340-200 and -300 series airplanes. AD 2014-09-05 required repetitive inspections of certain sidestay upper cardan pins of the main landing gear (MLG) and associated nuts and retainer assemblies, and pin replacement if necessary. This AD was prompted by a determination that a previously optional measurement is necessary to address the identified unsafe condition. This new AD continues to require a detailed inspection for visible chrome of each affected MLG sidestay upper cardan pin, associated nuts, and retainer assembly, and pin replacement if needed, and adds new requirements for measuring cardan pin clearance dimensions (gap check), doing corrective actions, and reporting all findings. We are issuing this AD to detect and correct migration of the sidestay upper cardan pin, which could result in disconnection of the sidestay upper arm from the airplane structure, and could result in a landing gear collapse and consequent damage to the airplane and injury to occupants.

Repetitive inspection. Re-inspect every 4 months. The next-due date/hours depend on this aircraft’s time in service — a records report computes it from the logbooks.

Which aircraft AD 2015-10-03 applies to

MakesAirbus
ModelsA330-201, A330-202, A330-203, A330-223, A330-243, A330-301, A330-302, A330-303, A330-321, A330-322, A330-323, A330-341, A330-342, A330-343, A340-211, A340-212, A340-213, A340-311, A340-312, A340-313, A330, A340
Part-conditional — 201252 series MLG, 201490 series MLG.

Applies only to airplanes equipped with basic (201252 series) or growth (201490 series) main landing gear (MLG).

Whether AD 2015-10-03 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.
Date — When the work was done.
Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.
Signature & certificate — The A&P/IA who returned it to service, with certificate number.
Is AD 2015-10-03 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.