Airworthiness Directive 2015-09-03
recurringAirworthiness Directives; Airbus Airplanes
What this AD requires
We are adopting a new airworthiness directive (AD) for certain Airbus Model A318-111 and -112 airplanes and Model A319, A320, and A321 series airplanes. This AD was prompted by reports of cracks on the forward corner fittings of engine pylon aft secondary structures. This AD requires repetitive inspections of certain forward corner fittings of the pylon aft secondary structures, and corrective actions if necessary. This AD also provides optional terminating action for the repetitive inspections. We are issuing this AD to detect and correct detachment of the lower fairing attachment and/or loss of the aft fixed fairing with the movable fairing from the airplane in flight, which could result in damage to the airplane.
Which aircraft AD 2015-09-03 applies to
Excludes airplanes on which Airbus Modification 33844 or Modification 33847, as applicable, has been embodied in production.
Whether AD 2015-09-03 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.