Airworthiness Directive 2015-08-02
one-timeAirworthiness Directives; Dassault Aviation Airplanes
What this AD requires
We are superseding Airworthiness Directive (AD) 2015-02-04 for certain Dassault Aviation Model MYSTERE-FALCON 50 airplanes. AD 2015- 02-04 required installing two protective plates between the electrical wiring under the glare shield and the engine fire pull handles. This new AD continues to require installing two protective plates between the electrical wiring under the glare shield and the engine fire pull handles. This AD was prompted by our determination that the published version of AD 2015-02-04 incorrectly identified the AD number as "AD 2014-02-04" in a certain paragraph. We are issuing this AD to prevent chafing of the electrical wiring, which could result in a short circuit and generation of smoke in the cockpit, potential loss of several functions essential for safe flight, and consequent reduced controllability of the airplane.
Which aircraft AD 2015-08-02 applies to
Serial numbers 2 through 250 are covered only if the airplane has Honeywell (formerly Allied Signal, Garrett AiResearch) TFE731-40-1C engines modified by Dassault Aviation Service Bulletin F50-280.
Whether AD 2015-08-02 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.