Airworthiness Directive 2015-03-05
one-timeAirworthiness Directives; Airbus Airplanes
What this AD requires
We are superseding Airworthiness Directive (AD) 2012-09-07 for certain Airbus Model A319-111, -112, and -132 airplanes; Model A320- 111, -211, -212, -214, and -232 airplanes; and Model A321-111, -211, - 212, and -231 airplanes. AD 2012-09-07 required an electrical bonding test between the gravity fill re-fuel adaptor and the top skin panels on the wings; and, if necessary, an inspection for corrosion of the component interface and adjacent area; and repairing the gravity fuel adaptor if necessary. This new AD adds airplanes to the applicability and requires inspecting those airplanes to determine if a repair was done, and doing the electrical bonding test and corrective action if necessary. This AD was prompted by a determination that more airplanes are subject to the identified unsafe condition. We are issuing this AD to detect and correct corrosion and improper bonding, which, in combination with a lightning strike in this area, could create a source of ignition in a fuel tank, resulting in a fire or explosion and consequent loss of the airplane.
Which aircraft AD 2015-03-05 applies to
All manufacturer serial numbers, except airplanes delivered from production with Airbus Modification 38209 (Removal of the Outer Wing Refueling Aperture) incorporated and without Airbus Modification 38206 (Re-introduction of the Outer Wing Refueling Aperture) incorporated.
Whether AD 2015-03-05 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.