TailplateTailplate
Run a report

Airworthiness Directive 2015-02-22

recurring
Official AD 2015-02-22 · FR doc 2015-01371 · 2015-02-02 · turboshaft engine

Airworthiness Directives; Rolls-Royce Corporation Turboprop and Turboshaft Engines

What this AD requires

We are superseding airworthiness directive (AD) 2012-14-06 for certain Rolls-Royce Corporation (RRC) 250-C20, -C20B, and -C20R/2 turboshaft engines. AD 2012-14-06 required a one-time visual inspection and fluorescent-penetrant inspection (FPI) on certain 3rd-stage and 4th-stage turbine wheels for cracks in the turbine blades. This new AD replaces the one-time visual inspection and FPI with repetitive visual inspections and FPIs. This AD also adds certain engine models to the applicability. This AD was prompted by the determination that the one- time inspections required by AD 2012-14-06 should be changed to repetitive inspections. We are issuing this AD to prevent failure of 3rd-stage and 4th-stage turbine wheel blades, which could cause engine failure and damage to the aircraft.

Repetitive inspection. Re-inspect. The next-due date/hours depend on this aircraft’s time in service — a records report computes it from the logbooks.

Which aircraft AD 2015-02-22 applies to

MakesRolls-Royce Corporation
Models250-B17, 250-B17B, 250-B17C, 250-B17D, 250-B17E, 250-B17F, 250-B17F/1, 250-B17F/2, 250-C20, 250-C20B, 250-C20F, 250-C20J, 250-C20R, 250-C20R/1, 250-C20R/2, 250-C20R/4, 250-C20S, 250-C20W, 250
Part-conditional — 23065818, 23055944.

Applies only when a 3rd-stage turbine wheel (P/N 23065818) or 4th-stage turbine wheel (P/N 23055944) is installed. 250-B17 series designations are turboprop engines; 250-C20 series designations are turboshaft engines.

Whether AD 2015-02-22 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.
Date — When the work was done.
Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.
Signature & certificate — The A&P/IA who returned it to service, with certificate number.
Is AD 2015-02-22 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.