Airworthiness Directive 2015-02-02
one-timeAirworthiness Directives; Bombardier, Inc. Airplanes
What this AD requires
We are adopting a new airworthiness directive (AD) for certain Bombardier, Inc. Model CL-215-6B11 (CL-215T Variant), and CL-215-6B11 (CL-415 Variant) airplanes. This AD was prompted by a report that, during a routine inspection, corrosion was discovered on the lower bearing of the rudder upper torque tube. This AD requires applying grease to the bearing; doing a general visual inspection of the expelled old grease for any contaminants, metal wear, and indication of corrosion, and replacing the bearing if necessary; and revising the maintenance or inspection program, as applicable, to incorporate the rudder spring tab operational test and a check of the rudder spring tab operation into the daily inspection. We are issuing this AD to prevent corroded bearings, which could result in a partial or total loss of axial support.
Which aircraft AD 2015-02-02 applies to
CL-215-6B11 (CL-215T Variant) S/N 1056-1125; CL-215-6B11 (CL-415 Variant) S/N 2001-2990
Whether AD 2015-02-02 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.