Airworthiness Directive 2015-02-12
one-timeAirworthiness Directives; Bombardier, Inc. Airplanes
What this AD requires
We are adopting a new airworthiness directive (AD) for certain Bombardier, Inc. Model DHC-8-400 series airplanes. This AD was prompted by reports of two in-service incidents where one side of the main landing gear (MLG) did not achieve down-lock. This AD requires doing a detailed inspection of the apex joints of the stabilizer brace lock link in the MLG for clearance; rectifying and repairing the clearance gap, if necessary; and lubricating the apex joints of the stabilizer brace lock link in the MLG. We are issuing this AD to detect and correct insufficiently greased stabilizer brace lock linkage of the MLG and over-torqued lock linkage attachment bolts, which could lead to the failure to extend and down-lock the MLG, and could affect the safe landing of the airplane.
Which aircraft AD 2015-02-12 applies to
Whether AD 2015-02-12 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.