TailplateTailplate
Run a report

Airworthiness Directive 2014-23-08

recurring
Official AD 2014-23-08 · FR doc 2014-27360 · 2014-11-26 · airframe

Airworthiness Directives; Airbus Airplanes

What this AD requires

We are superseding Airworthiness Directive (AD) 2012-06-19 for certain Airbus Model A330-201, -202, -203, -223, -243, -301, -302, - 303, -321, -322, -323, -341, -342, and -343 airplanes; and Model A340- 200 and -300 series airplanes. AD 2012-06-19 required repetitive inspections of the main fitting and sliding tube of the nose landing gear (NLG) for defects, damage, and cracks; and corrective actions if necessary. This new AD requires an inspection of the part number and serial number of the NLG main fitting and NLG sliding tube; for affected parts, this new AD requires a magnetic particle inspection (MPI) for cracks, and flap peening and replacement if necessary. This new AD also requires, for certain parts, additional inspections for damage and cracking. This new AD also adds airplanes to the applicability. This AD was prompted by reports of a cracked main fitting and sliding tube during NLG overhaul. We are issuing this AD to detect and correct cracks, defects, or damage of the main fitting or sliding tube, which could result in consequent NLG collapse.

Repetitive inspection. Re-inspect every 900 hours. The next-due date/hours depend on this aircraft’s time in service — a records report computes it from the logbooks.

Which aircraft AD 2014-23-08 applies to

MakesAirbus
ModelsA330-201, A330-202, A330-203, A330-223, A330-223F, A330-243, A330-243F, A330-301, A330-302, A330-303, A330-321, A330-322, A330-323, A330-341, A330-342, A330-343, A340-211, A340-212, A340-213, A340-311, A340-312, A340-313, A330, A340

Whether AD 2014-23-08 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.
Date — When the work was done.
Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.
Signature & certificate — The A&P/IA who returned it to service, with certificate number.
Is AD 2014-23-08 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.