Airworthiness Directive 2014-23-06

one-time
Official AD 2014-23-06 · FR doc 2014-26985 · 2014-11-20 · airframe

Airworthiness Directives; Bombardier, Inc. Airplanes

What this AD requires

We are adopting a new airworthiness directive (AD) for certain Bombardier, Inc. Model CL-600-2B19 (Regional Jet Series 100 & 440) airplanes. This AD was prompted by a report indicating that inboard and outboard hydraulic lines of the brakes were found connected to the incorrect ports on the swivel assembly of the main landing gear (MLG). This AD requires modifying the MLG by installing a new bracket on the left and right lower aft-wing planks. We are issuing this AD to prevent incorrect installation of the brake hydraulic lines, which could cause the brakes and the anti-skid system to operate incorrectly, and consequent catastrophic failure of the airplane during a high-speed rejected takeoff.

Which aircraft AD 2014-23-06 applies to

MakesBombardier, Inc.
ModelsCL-600-2B19, CL-600
Serial-conditional — narrows to serials 7003–?.

Regional Jet Series 100 & 440; serial numbers 7003 and subsequent.

Whether AD 2014-23-06 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of complianceThe specific action taken (inspected, replaced, modified) and to what revision.
DateWhen the work was done.
Aircraft timeTotal time in service / tach at compliance — how recurring next-due is computed.
Signature & certificateThe A&P/IA who returned it to service, with certificate number.
Is AD 2014-23-06 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.