TailplateTailplate
Run a report

Airworthiness Directive 2014-22-10

recurring
Official AD 2014-22-10 · FR doc 2014-26439 · 2014-11-28 · airframe

Airworthiness Directives; The Boeing Company Airplanes

What this AD requires

We are adopting a new airworthiness directive (AD) for certain The Boeing Company Model DC-8-55, DC-8F-54, and DC-8F-55 airplanes, Model DC-8-60 series airplanes, Model DC-8-60F series airplanes, Model DC-8-70 series airplanes, and Model DC-8-70F series airplanes. This AD was prompted by multiple reports of cracking of the upper aft skin panel of the fuselage. An evaluation by the design approval holder (DAH) indicates that the upper aft skin panel of the fuselage is subject to widespread fatigue damage (WFD). This AD requires removing any previously installed local repairs; installing a full-length improvement modification with or without finger doublers, or a full- length repair with or without finger doublers, as applicable; and doing repetitive inspections for cracking of the doublers, and repair if necessary. We are issuing this AD to detect and correct fatigue cracking of the upper aft skin panel of the fuselage, which could result in loss of structural integrity and consequent rapid decompression of the airplane.

Repetitive inspection. Re-inspect every 72 months. The next-due date/hours depend on this aircraft’s time in service — a records report computes it from the logbooks.

Which aircraft AD 2014-22-10 applies to

MakesBoeing
ModelsDC-8-55, DC-8F-54, DC-8F-55, DC-8-61, DC-8-62, DC-8-63, DC-8-61F, DC-8-62F, DC-8-63F, DC-8-71, DC-8-72, DC-8-73, DC-8-71F, DC-8-72F, DC-8-73F, DC-8, DC-8F

Applicability as identified in Boeing Alert Service Bulletin DC8-53A080, Revision 2, dated September 18, 2013.

Whether AD 2014-22-10 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.
Date — When the work was done.
Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.
Signature & certificate — The A&P/IA who returned it to service, with certificate number.
Is AD 2014-22-10 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.