Is AD 2014-20-07 a recurring Airworthiness Directive?

Yes — AD 2014-20-07 requires a repetitive inspection. Next-due depends on the aircraft's time in service.

Which aircraft does AD 2014-20-07 apply to?

AD 2014-20-07 applies to The Boeing Company — models 747-200C, 747-200F, 747. Serial/part conditions may narrow it to specific aircraft.

Airworthiness Directive 2014-20-07

recurring

Official AD 2014-20-07 · FR doc 2014-23377 · 2014-10-03 · airframe

Airworthiness Directives; the Boeing Company Airplanes

What this AD requires

We are superseding Airworthiness Directive (AD) 2010-03-05 for all the Boeing Company Model 747-200C and -200F series airplanes. AD 2010-03-05 required, for the upper chords of the upper deck floor beam of section 41, an inspection for cracking of certain fastener holes, and corrective action if necessary; and repetitive replacements of the upper chords, straps (or angles), and radius fillers of certain upper deck floor beams and, for any replacement that is done, inspections for cracking, and corrective actions if necessary. This new AD adds repetitive inspections of the upper chords of the upper deck floor beam of Section 42, repetitive replacements of the upper chords, post- replacement inspections, and corrective actions if necessary. This new AD also adds post-replacement inspections for section 41 and reduces certain compliance times. This AD was prompted by a determination that the upper deck floor beams are subject to widespread fatigue damage (WFD), the existing inspection program is not sufficient to maintain an acceptable level of safety, and the upper chords of the upper deck floor beam of section 42 are subject to the unsafe condition. We are issuing this AD to detect and correct cracking of the upper chords and straps (or angles) of the floor beams, which could lead to failure of the floor beams and consequent loss of controllability, rapid decompression, and loss of structural integrity of the airplane.

Repetitive inspection. Re-inspect. The next-due date/hours depend on this aircraft’s time in service — a records report computes it from the logbooks.

Which aircraft AD 2014-20-07 applies to

MakesThe Boeing Company

Models747-200C, 747-200F, 747

Whether AD 2014-20-07 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.

Date — When the work was done.

Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.

Signature & certificate — The A&P/IA who returned it to service, with certificate number.

Is AD 2014-20-07 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.