Airworthiness Directive 2014-19-05
recurringAirworthiness Directives; Turbomeca S.A. Turboshaft Engines
What this AD requires
We are adopting a new airworthiness directive (AD) for all Turbomeca S.A. Arriel 1A1, 1A2, 1B, 1C, 1C1, 1C2, 1D, 1D1, 1E2, 1K1, 1S, 1S1, 2B, 2B1, 2C, 2C1, 2C2, 2S1, and 2S2 turboshaft engines. This AD requires an initial one-time vibration check of the engine accessory gearbox (AGB) on certain higher risk Arriel 1 and Arriel 2 model engines. This AD also requires repetitive vibration checks of the engine AGB for all Arriel 1 and Arriel 2 engines at every engine shop visit. This AD was prompted by reports of uncommanded in-flight shutdowns on Turbomeca S.A. Arriel 1 and Arriel 2 engines following rupture of the 41-tooth gear forming part of the 41/23-tooth bevel gear located in the engine AGB. We are issuing this AD to prevent failure of the engine AGB, which could lead to in-flight shutdown and damage to the engine, which may result in damage to the aircraft.
Which aircraft AD 2014-19-05 applies to
Whether AD 2014-19-05 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.