Airworthiness Directive 2014-19-03
one-timeAirworthiness Directives; The Boeing Company Airplanes
What this AD requires
We are adopting a new airworthiness directive (AD) for certain The Boeing Company Model 747-8 and 747-8F series airplanes. This AD was prompted by an analysis by the manufacturer, which revealed that certain fuse pins for the strut-to-wing attachment of the outboard aft upper spar are susceptible to migration in the event of a failed fuse pin through bolt. This AD requires replacing the fuse pins for the strut-to-wing attachment of the outboard aft upper spar with new fuse pins, and replacing the access cover assemblies with new access cover assemblies. We are issuing this AD to prevent migration of these fuse pins, which could result in the complete disconnect and loss of the strut-to-wing attachment load path for the outboard aft upper spar. The complete loss of an outboard aft upper spar strut-to-wing attachment load path could result in divergent flutter in certain parts of the flight envelope, which could result in loss of control of the airplane.
Which aircraft AD 2014-19-03 applies to
Applies only to airplanes having a variable number identified in paragraph 1.A., Effectivity, of Boeing Alert Service Bulletin 747-54A2238, dated January 31, 2014, and variable number RC573.
Whether AD 2014-19-03 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.