TailplateTailplate
Run a report

Airworthiness Directive 2014-20451

one-time
AD 2014-20451 · 2014-08-28 · reciprocating engine

Airworthiness Directives; Technify Motors GmbH Reciprocating Engines

What this AD requires

We are adopting a new airworthiness directive (AD) for certain Technify Motors GmbH (type certificate previously held by Thielert Aircraft Engines GmbH) TAE 125-02-99 and TAE 125-02-114 reciprocating engines. This AD requires removal of each high-pressure (HP) fuel pump before 300 flight hours (FHs) in service or within 55 FHs after the effective date of the AD, whichever occurs later. This AD was prompted by in-flight shutdowns on airplanes with TAE 125-02 engines. We are issuing this AD to prevent failure of the HP fuel pump, which could result in damage to the engine and damage to the airplane.

Which aircraft AD 2014-20451 applies to

Applicability depends on the aircraft’s type certificate — check it against the specific tail.

Whether AD 2014-20451 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.
Date — When the work was done.
Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.
Signature & certificate — The A&P/IA who returned it to service, with certificate number.
Is AD 2014-20451 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.