TailplateTailplate
Run a report

Airworthiness Directive 2014-16-18

one-time
Official AD 2014-16-18 · FR doc 2014-19262 · 2014-08-28 · airframe

Airworthiness Directives; BAE Systems (Operations) Limited Airplanes

What this AD requires

We are adopting a new airworthiness directive (AD) for all BAE Systems (Operations) Limited Model BAe 146 series airplanes and Model Avro 146-RJ series airplanes. This AD was prompted by reports of cracking of the main fitting of the nose landing gear (NLG). This AD requires revising the maintenance program by incorporating a new safe- life limitation for the NLG main fitting. We are issuing this AD to prevent collapse of the NLG, which could lead to degradation of direction control on the ground or an un-commanded turn to the left, and a consequent loss of control of the airplane on the ground, possibly resulting in damage to the airplane and injury to occupants.

Which aircraft AD 2014-16-18 applies to

MakesBae Systems (Operations) Limited
ModelsBAe 146-100A, BAe 146-200A, BAe 146-300A, Avro 146-RJ70A, Avro 146-RJ85A, Avro 146-RJ100A, BAe 146, Avro 146-RJ

Whether AD 2014-16-18 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.
Date — When the work was done.
Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.
Signature & certificate — The A&P/IA who returned it to service, with certificate number.
Is AD 2014-16-18 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.