Is AD 2014-13-10 a recurring Airworthiness Directive?

No — AD 2014-13-10 is a one-time directive. Verify it was complied with in the aircraft's records.

Which aircraft does AD 2014-13-10 apply to?

AD 2014-13-10 applies to Boeing — models 737-600, 737-700, 737-700C, 737-800, 737-900, 737-900ER, 737. Serial/part conditions may narrow it to specific aircraft.

Airworthiness Directive 2014-13-10

one-time

Official AD 2014-13-10 · FR doc 2014-15506 · 2014-07-15 · airframe

Airworthiness Directives; The Boeing Company Airplanes

What this AD requires

We are adopting a new airworthiness directive (AD) for certain The Boeing Company Model 737-600, -700, -700C, -800, -900, and -900ER series airplanes. This AD was prompted by a report of installation of incorrect wire support clamps within the bay area of the left and right environmental control systems (ECS) during production; the ECS bay area is a flammable fluid leakage zone. Use of incorrect wire support clamps that are not fully cushioned could allow electrical power wiring to come in contact with the exposed metal of the improper clamp, causing a short circuit and subsequent electrical arcing. This AD requires inspecting to identify the part number of the wire support clamp, and related investigative and corrective actions if necessary. We are issuing this AD to prevent electrical arcing and a potential ignition source, which, in combination with flammable fuel vapors, could result in a fuel tank explosion, and consequent loss of the airplane.

Which aircraft AD 2014-13-10 applies to

MakesBoeing

Models737-600, 737-700, 737-700C, 737-800, 737-900, 737-900ER, 737

Applies to airplanes having a variable number identified in paragraph 1.A.1, Effectivity, of Boeing Special Attention Service Bulletin 737-28-1312, Revision 1, dated April 21, 2014.

Whether AD 2014-13-10 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.

Date — When the work was done.

Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.

Signature & certificate — The A&P/IA who returned it to service, with certificate number.

Is AD 2014-13-10 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.