Airworthiness Directive 2014-11-04
one-timeAirworthiness Directives; Airbus Airplanes
What this AD requires
We are adopting a new airworthiness directive (AD) for certain Airbus Model A330-200, A330-200 Freighter, and A330-300 series airplanes; and Model A340-200, A340-300, A340-500, and A340-600 series airplanes. This AD was prompted by a non-connection of the constant speed motor/generator (CSM/G) during a final assembly operational test. This AD requires a detailed inspection of the connector wires for connector 1XE-A of the generator control unit (GCU)-CSM/ G for discrepancies (evidence of arcing or overheating damage), and related investigative and corrective actions if necessary. We are issuing this AD to detect and correct incorrect locking of contacts into connector 1XE-A of the GCU-CSM/G, which could result in a loss of contact continuity and lead to the CSM/G not operating, which, in conjunction with an emergency electrical configuration loss of the main electrical system or total engine flameout, could adversely affect the airplane's safe flight.
Which aircraft AD 2014-11-04 applies to
Applies to manufacturer serial numbers (MSNs) 1 through 1391 inclusive, except MSNs 0925 and 1382.
Whether AD 2014-11-04 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.