Is AD 2014-08-01 a recurring Airworthiness Directive?

No — AD 2014-08-01 is a one-time directive. Verify it was complied with in the aircraft's records.

Which aircraft does AD 2014-08-01 apply to?

AD 2014-08-01 applies to Airbus — models A318-111, A318-112, A318-121, A318-122, A319-111, A319-112, A319-113, A319-114. Serial/part conditions may narrow it to specific aircraft.

Airworthiness Directive 2014-08-01

one-time

Official AD 2014-08-01 · FR doc 2014-09623 · 2014-04-29 · airframe

Airworthiness Directives; Airbus Airplanes

What this AD requires

We are superseding Airworthiness Directive (AD) 2014-03-08 for all Airbus Model A318, A319, A320, and A321 series airplanes. AD 2014- 03-08 required an inspection to determine the part number of the interconnecting struts installed on the wings, identifying the part number and the serial number of the associated target and proximity sensor if applicable, and replacing or re-identifying the flap interconnecting strut if applicable. This new AD corrects a typographical error that affects the definition of a serviceable interconnecting strut. This AD was prompted by a report that an investigation showed that when a certain combination of a target/ proximity sensor serial number is installed on a flap interconnecting strut, a "target FAR" signal cannot be detected when it reaches the mechanical end stop of the interconnecting strut. We are issuing this AD to detect and correct a latent failure of the flap down drive disconnection due to an already-failed interconnecting strut sensor, which could result in asymmetric flap panel movement and consequent loss of control of the airplane.

Which aircraft AD 2014-08-01 applies to

MakesAirbus

ModelsA318-111, A318-112, A318-121, A318-122, A319-111, A319-112, A319-113, A319-114, A319-115, A319-131, A319-132, A319-133, A320-111, A320-211, A320-212, A320-214, A320-231, A320-232, A320-233, A321-111, A321-112, A321-131, A321-211, A321-212, A321-213, A321-231, A321-232, A318, A319, A320, A321

Whether AD 2014-08-01 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.

How AD compliance is recorded

A valid compliance record (14 CFR 43.9) states:

Method of compliance — The specific action taken (inspected, replaced, modified) and to what revision.

Date — When the work was done.

Aircraft time — Total time in service / tach at compliance — how recurring next-due is computed.

Signature & certificate — The A&P/IA who returned it to service, with certificate number.

Is AD 2014-08-01 complied with on your aircraft?

Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.

Look up a tail number →Read the full directive (Federal Register)

Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.