Airworthiness Directive 2014-08-08
recurringAirworthiness Directives; the Boeing Company Airplanes
What this AD requires
We are adopting a new airworthiness directive (AD) for certain The Boeing Company Model 737-200, -200C, -300, -400, and -500 series airplanes. This AD was prompted by reports of cracking found in the skin at the lower aft corner of the forward entry doorway on airplanes that do not have an airstair door cutout. This AD requires repetitive inspections for cracking in the lower corners of the forward entry doorway on airplanes that do not have an airstair door cutout, and repair if necessary. We are issuing this AD to detect and correct cracking in the lower corners of the forward entry doorway, which could lead to crack progression and consequent rapid decompression of the airplane.
Which aircraft AD 2014-08-08 applies to
Applies only to airplanes without an airstair door cutout, as identified in Boeing Alert Service Bulletin 737-53A1329, dated June 4, 2013. Installation of STC ST01219SE does not affect applicability of the required actions.
Whether AD 2014-08-08 actually applies to your aircraft (by serial and installed parts) and whether it’s already complied with comes from that aircraft’s records.
How AD compliance is recorded
A valid compliance record (14 CFR 43.9) states:
Tailplate reads a tail number’s logbooks and matches every applicable AD — including this one — to its compliance evidence, with recurring next-due dates computed.
Look up a tail number →Read the full directive (Federal Register)Applicability is derived from the FAA directive corpus and is advisory, not a legal airworthiness determination. Compliance is established only from an aircraft’s actual records.